![]() |
A compact IP65-rated WashBeam moving head designed for outdoor use. It features 7 x 40W RGBW LEDs and durable housing that protects against dust and UV exposure. With NFC technology for wireless setup and diagnostics, it’s perfect for festivals, concerts, and outdoor events in any weather. |
Ideally suited for festivals, concerts, theatre, and outdoor events, or indeed any scenario dealing with inclement or unpredictable weather, the iBeam 250™ retains all the favourite features of its indoor relative, the LEDBeam 150™. The ingenious ingress protection has been specifically designed and developed to ensure the fixture is completely sealed, to fully comply with IP65 protection standards. Their aluminium housing gives a dust-free environment for the optics, eliminating the need for frequent cleaning, routine maintenance, and UV damage to plastic parts.
By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even when the fixture is not powered, directly from your mobile device using the Robe Com app. iBeam 250™ uses the same 7 x 40-Watt RGBW multichip LED source as the original, producing an increased output of 4.400 lumens. With the identical 15.5:1 zoom optical system, giving the same, tight 3.8° Beam to wide 60° Wash, you have all the flexibility you require.
Light source type: 7 x 40W RGBW multichips
LED life expectancy: min. 50.000 hours
Typical lumen maintenance: L70/B50 @ 50.000 hours
Robe’s proprietary optical design
High-efficiency zoom optical system, ratio 15,5:1
Zoom range: 3.8° - 60°
Fixture total lumen output:
-
4.400 lm (integrating sphere)
-
3.500 lm (goniophotometer)
Innovative lens coating technology (Patent pending)
Illuminance: 15.000lx @ 5 m
Colour mixing mode RGBW or CMY
White light: Variable CCT 2.700K - 8.000K
DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
Motorized zoom
Pre-programmed random strobe & pulse effects
High resolution electronic dimming: 0 - 100%
L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K
Height: 471.5 mm (18.56")
Width: 354.2 mm (13.94")
Depth: 226.6 mm (8.92")
Weight: 13.9 kg (30.64 lbs)
Ingress protection rating: IP65
Setting & Addressing: two-row LCD display & 4 control buttons, stand-alone operation with 3 editable programs (each up to 40 steps)
Protocols: USITT DMX-512, RDM
Wireless CRMX™ technology from Lumen Radio: on request
Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity - on request
DMX Protocol modes: 2
Control channels: 22, 16
Pan/Tilt resolution: 8 or 16 bit
RGBW / CMY: 8 or 16 bit
Zoom: 8 or 16 bit
Dimmer: 8 or 16 bit (internal 18 bit)
Pan movement:
-
540° standard
-
450° reduced
Tilt movement: 228°
Movement control: Standard and Speed
Controllable speed of Pan/Tilt movement
Automatic Pan/Tilt position correction
Maximum ambient temperature: 45°C (113°F)
Maximum surface temperature: 80°C (176°F)
Minimum operating temperature: -10°C (14°F)
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: max. 280 W
Power connector in/out: IP 65 Neutrik powerCON TRUE1 in/out
DMX and RDM data in/out: IP65 Locking 5-pin XLR connectors
Mounting points: 2 pairs of ¼-turn locks
2x Omega adaptors with 1/4-turn quick locks
Universal operating position
Safety cable attachment point